We are more than an aluminium alloy solution provider.
Do you need consumer aluminium alloy products or learn more info about aluminum alloy prices?
Aluminum 2024 is one of the highest strength 2xxx alloys, the copper and magnesium are the main elements in this alloy. The most commonly used temper designs include 2024T3, 2024T351, 2024T4, 2024 T6 and 2024T4. Yield Strength (0.2 % offset), ksi, ≥ (unless otherwise specified) Elongation in 2 in. or 4xDiameter, ≤, % Bend Diameter
Aluminum 2024-T4; 2024-T351. Subcategory: 2000 Series Aluminum Alloy; Aluminum Alloy; Metal; Nonferrous Metal Close Analogs: Composition Notes: A Zr + Ti limit of 0.20 percent maximum may be used with this alloy designation for extruded and forged products only, but only when the supplier or producer and the purchaser have mutually so
2024-O temper aluminium has no heat treating. It has an ultimate tensile strength of 140-210 MPa (21-30 ksi), and a maximum yield strength of no more than 97 MPa (14,000 psi). The material has elongation (stretch before ultimate failure) of 10-25%, this is the allowable range per applicable AMS
ALUMINIUM ALLOYS - YIELD STRENGTH AND TENSILE STRENGTH. Aluminum has typical tensile strength between 40 MPa to 700 MPa. The mechanical strength of aluminum can be increased by cold working and alloying. Aluminum Alloy 2024 Heat Treated and aged (T351 Temper) 325 (47) 470 (68) 20: Aluminum Alloy 6061 Annealed (O Temper) 55 (8) 124 (18) 30:
2024 aluminum alloy properties, data sheet. 2024 is heat-treatable aluminum alloy with copper as the primary alloying element. : Yield Strength (ksi) Elongation (%) 2024-O: 17. 11. 18. 2024-T3: 70. 50. 16. 2024-T4: 68. 47. 20. United Aluminum can supply 2024 in the annealed temper for maximum formability. The formed parts can be
2024 Aluminum Alloy: Properties General Characteristics Characteristic Appraisal Property 2024-T3 2024-4, -T-T851 Tensile Strength 483 MPa | 70000 psi 469 MPa | 68000 psi >=455 MPa | 66000 psi Yield Strength 345 MPa | 50000 psi 324 MPa | 47000 psi >=400 MPa | 58000 psi Modulus of Elasticity 73.1 GPa
The yield and ultimate strengths of 2024 aluminum are quite high at 47,000 psi and 68,000 psi respectively, which makes the alloy highly useful for certain high-strength structural applications. Type 2024 aluminum alloy has high-strength, good workability, excellent mability and the ability to accept cladding to make it corrosion
Aluminum 2024 (UNS A92024) is an aerospace-grade aluminum with exceptional strength-to-weight ratio, fatigue resistance, and mability for structural parts. Tensile Strength: 400 - 470 MPa: Yield Strength: 240 - 300 MPa: Young\'s Modulus (E) 73 GPa: Shear Modulus (G) 28 GPa: Elongation at Break: 10 - 20%: Poisson\'s Ratio (ν) 0.33
Yield strength of 5 kilo-pound per square inch (35 Mega Pascal) 20% elongation: 2024-T3 68 kilo-pound per square inch for tensile strength (469 Mega Pascal) Strength. 2024 aluminum is better suited for applications requiring high strength than 6061 aluminum because it has a higher strength-to-weight
The 2024 aluminum alloy is recognized for its high strength-to-weight ratio and excellent fatigue resistance, making it a preferred choice in aerospace and structural applications. Its key mechanical properties include an ultimate tensile strength of approximay 469 MPa (2024-T4) and a yield strength of about 324 MPa (2024-T4), with softer
2024-T3 Aluminum Mechanical Properties Al 2024-T351, 2024T4, 2024T6 2024-T3 aluminum mechanical properties are listed in the tables below including yield strength (yield stress), ultimate tensile strength, shear strength, modulus of elasticity, young\'s modulus,
Aluminum 2024-T4; 2024-T351 Subcategory: 2000 Series Aluminum Alloy; Aluminum Alloy; Metal; Nonferrous Metal Close Analogs: Composition Notes: A Zr + Ti limit of 0.20 percent maximum may be used with this alloy designation for extruded and forged products only, but only when the supplier or producer and the purchaser have mutually so
2024 aluminum is heat-treatable aluminum alloy with copper as the primary alloying element. It is malleable when in the fully soft, annealed temper and can be heat-treated to high strength levels after
Mechanical Properties of 2024 Aluminum Here we can see the tensile strength, yield strength, and modulus of elasticity for the alloy in the T3, T4/T351, and T851
The common tempers of 2024 aircraft aluminum alloy is T3, T4, T351 and T851. What are aluminium 2024 t3 properties? It has an ultimate strength of 62000 PSI and a shear strength of 40000 PSI. 2024 plate has an ultimate tensile strength of 400-430 MPa (58-62 ksi) and a yield strength of at least 270-280 MPa (39-40
Yield strength shows the stress level at which 2024 aluminum starts to deform permanently. For 2024 aluminum, the yield strength typically falls between 325 MPa and 352
Property 2024-T3 Density 2.78 g/cc | 0.100
Product Description Alloy 2024 is one of the more prominent aluminium alloys. Due to the alloys good fatigue resistance, especially in thick plate form, the material is specified for use in the aerospace and military sector in fuselage applications in such areas as structures and wing tension members. With improved fracture toughness and fatigue crack growth, Alloy 2024 continues to maintain
Alloy 2024 was introduced by Alcoa in 1931 as an alclad sheet in the T3 temper. It was the first Al-Cu-Mg alloy to have a yield strength approaching 50,000-psi and generally replaced 2017-T4 (Duralumin) as the predominant 2XXX series aircraft
Aluminum 2024 is a copper-based high-strength aluminum alloy, widely used in aerospace for its exceptional strength-to-weight ratio, mability, and fatigue